The ORICOM UHF380 80CH UHF RADIO+SCANNER AND 6.5DB UHF ANTENNA PACK is currently out of stock

Check out Oricom UHF Radios category for other Great deals.

ORICOM UHF380 5 WATT UHF RADIO+ ORICOM 6.5DB UHF STAINLESS STEEL ANTENNA ANTENNA PACK

5 YEAR AUSTRALIA WARRANTY

FREE EXPRESS POST AUSTRALIA WIDE

ORICOM UHF380 UHF RADIO

Key Features

• 80 Narrowband channels*

• 5 watts (max TX power)

• Heavy duty controller speaker microphone

• Ultra compact transceiver

• Rotary volume & channel knob

• Wide band scanner (400 – 512MHz)

• 8500+ Receive frequencies

• 200 programmable receive only channels

• 5 Digit Selcall ID with alpha display

• CTCSS and DCS

• Tri colour backlit LCD display (Amber/Red/Green)

• Duplex (range extender)

• Open/Priority and Instant Channel Scan

• Digital squelch control

• Busy channel lockout

• Rugged chassis construction with integrated heat sink

Compliance	AS/NZS 4365:2011
Frequency Range TX	476.425 - 477.4125 MHz
Frequency Range RX	400 - 512MHz
Number of TX/RX Channels	80 UHF CB
Number of user programmable RX only Channels	200
Channel Spacing TX/RX	12.5KHz
Wide Band Scanner	400~512, 400~420, 420~450, 450~470, 470~512 MHz
Operating modes	Simplex, Repeater TX offset (+750kHz)
Selcall ID	5 Digit with alpha display
Scanning Speed	130 msec per channel
Antenna Impeadance	50 Ohms
Operating Volts nominal	13.8 VDC
Operating Volts Range	10 to 15 VDC
Over Voltage Protection	Diode and voltage regulator
Over Current Protection	2 Amp fuse
Reverse Polarity Protection	Shunt diode
Frequency Stability	+/- 5ppm
Transmitter
RF Output Power	Nominal 5watts
Modulation	F3E (FM)
Maximum Deviation	2.5kHz
Spurious Emissions	< -30 dBm
TX Audio pre-emphasis	+ 6dB/octave from 300Hz to 3kHz
Current Consumption during TX	1.6 Amps with 50 Ohm antenna termination
Reciever
Circuit Type	Dual conversion superheterodyne
IF Frequencies	1st IF = 21.4MHz , 2nd IF = 450kHz
Current Consumption during RX	200mA
Sensitivity	< -123dBm at 12dB SINAD
Sensitivity Receive only channels	< -110dBm for 12dB SINAD
Selectivity	+/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB
Intermodulation Immunity	> 70dB
Spurious Immunity	> 70dB
Audio Output Power	3 Watts Maximum
RX Audio de-emphasis	-6dB/octave 300Hz to 3kHz
Audio frequency response	300Hz to 3kHz
External speaker jacks	One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.)
Transciever
Dimensions	135 (d) x 110 (w) x 29 (h) mm
Weight	420g

ANS65SS 6.5DB UHF 477MHZ ANTENNA STAINLESS STEEL

This rugged stainless steel antenna certainly represents the state of the art in ground independent technology,providing a low angle of radiation with a minimum of 6.5db gain.With it's spring base it is durable and highly flexible for these rugged conditions.This antenna is ideal for applications that have little or no ground plane area or applications that require a rugged durable antenna. The antenna is also stainless steel so it will not corrode in any type of australian condition as it is made in australia.

5 YEAR WARRANTY......................

MADE IN AUSTRALIA.....................

SPECIFICATIONS

TYPE...........GROUND INDEPENDENT COLINEAR

LENGTH.......820MM

WEIGHT.......380 GRAMS

TUNING........FACTORY PRESET

FREQ...........477MHZ

IMPEDANCE.50 OHMS

MAX POWER. 200 WATTS

CABLE.........4.3M LOW LOSS WITH CONNECTOR PL259

PATTERN.....OMNI DIRECTIONAL

USE.............MOBILE OR BASE

GAIN............6.5dB

VSWR..........<1.5 TO 1 OVER 18MHZ

The ORICOM UHF380 80CH UHF RADIO+SCANNER AND 6.5DB UHF ANTENNA PACK is currently out of stock

Check out Oricom UHF Radios category for other Great deals.

Information

Contact Us